 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) TS393C,I,M MICROPOWER DUAL CMOS VOLTAGE COMPARATORS . . . . . . . . EXTREMELY LOW SUPPLY CURRENT : 9A TYP/COMPARATOR WIDE SINGLE SUPPLY RANGE (3V to 16V) OR DUAL SUPPLIES (1.5V to 8V) EXTREMELY LOW INPUT BIAS CURRENT : 1pA TYP EXTREMELY LOW INPUT OFFSET CURRENT : 1pA TYP INPUT COMMON-MODE VOLTAGE RANGE INCLUDES GND HIGH INPUT IMPEDANCE 1012 TYP FAST RESPONSE TIME : 2.5s TYP FOR 5mV OVERDRIVE PIN-TO-PIN AND FUNCTIONALLY COMPATIBLE WITH BIPOLAR LM393 N DIP8 (Plastic Package) D SO8 (Plastic Micropackage) P TSSOP8 (Thin Shrink Small Outline Package) DESCRIPTION The TS393 is a micropower CMOS dual voltage comparator with extremely low consumption of 9A typ / comparator (20 times less than bipolar LM393). Similar performances are offered by the dual micropower comparator TS3702 with a pushpull CMOS output. Thus response times remain similar to the LM393. PIN CONNECTIONS (top view) ORDER CODES Part Number TS393C TS393I TS393M Example : TS393CN Temperature Range 0 C, +70 C -40 C, +125 C -55 C, +125 C o o o o o o Package N q q q N q q q P q q q Output 1 Inverting Input 1 Non-inverting Input 1 VCC - 1 2 3 4 + + 8 7 6 5 V CC + Output 2 Inverting Input 2 Non-inverting Input 2 April 1999 1/6 TS393C,I,M SCHEMATIC DIAGRAM (for 1/2 TS393) VCC + T 10 T1 T2 T9 T 17 R1 Input T3 T4 T11 T 12 Input + T 18 Output T 20 T 13 T8 T 19 T5 T6 T7 T 14 T 15 T 16 VCC - MAXIMUM RATINGS Symbol + VCC Vid Vi VO IO IF Toper Parameter Supply Voltage - (note 1) Differential Input Voltage - (note 2) Input Voltage - (note 3) Output Voltage Output Current Forward Current in ESD Protection Diodes on Input - (note 4) Operating Free-Air Temperature Range TS393C TS393I TS393M Storage Temperature Range Value 18 18 18 18 20 50 0 to +70 -40 to +125 -55 to +125 -65 to +150 Unit V V V V mA mA o C Tstg o C Notes : 1. All voltage values, except differential voltage, are with respect to network ground terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 3. Excursions of input voltages may exceed the power supply level. As long as the common mode voltage [Vicm=(Vin+ + Vin- )/2] remains within the specified range, the comparator will provide a stable output state. However, the maximum current through the ESD diodes (If) of the input stage must strictly be observed. The output must never exceed the power supply voltage. 4. Guaranteed by design. 5. Short circuit from outputs to VCC+ can cause excessive heating and eventual destruction. OPERATING CONDITIONS Symbol + VCC Vicm 2/6 Parameter Supply Voltage Common Mode Input Voltage Range TS393C,I TS393M Value 3 to 16 4 to 16 + 0 to VCC -1.5 Unit V V TS393C,I,M ELECTRICAL CHARACTERISTICS VCC+ = 5V, VCC- = 0V, Tamb = 25C (unless otherwise specified) Symbol Vio Parameter Input Offset Voltage + VIC = VIcm min., VCC = 5V to 10V - (note 1) Tmin. Tamb Tmax. Input Offset Current - (note 2) VIC = 2.5 V Tmin. Tamb Tmax. Input Bias Current - (note 2) VIC = 2.5 V Tmin. Tamb Tmax. Input Common Mode Voltage Range Tmin. Tamb Tmax. Common-mode Rejection Ratio VIC = Vicm min. Supply Voltage Rejection Ratio + VCC = +5V to +10V High Level Output Current Vid = 1V, VOH = +5V Tmin. Tamb Tmax. Low Level Output Voltage Vid = -1V, I OL = 6mA Tmin. Tamb Tmax. Supply Current (2 comparators) No load - Outputs low Tmin. Tamb Tmax. Response Time Low to High Vic = 0V, f = 10kHz, RL = 5.1k, CL = 15pF, Overdrive = Overdrive = Overdrive = Overdrive = TTL Input 5mV 10mV 20mV 40mV 0 to VCC+-1.2 + 0 to VCC -1.5 71 dB 80 nA 2 40 1000 mV 260 400 650 A 20 40 50 s Min. Typ. 1.4 Max. 5 6.5 pA 1 300 pA 1 600 V dB Unit mV Iio Iib Vicm CMR SVR IOH VOL ICC tPLH 1.5 1.2 1.0 0.8 0.7 2.5 1.9 1.2 0.8 0.08 25 tPHL Response Time High to Low Vic = 0V, f = 10kHz, RL = 5.1k, CL = 15pF, Overdrive = 5mV Overdrive = 10mV Overdrive = 20mV Overdrive = 40mV TTL Input s tf Fall Time f = 10kHz, CL = 15pF, R L = 5.1k, Overdrive 50mV ns Note : 1. The specified offset voltage is the maximun value required to drive the output up to 4.5V or down to 0.3V. 2. Maximum values including unavoidable inaccuracies of the industrial test. 3/6 TS393C,I,M PACKAGE MECHANICAL DATA 8 PINS - PLASTIC DIP Dimensions A a1 B b b1 D E e e3 e4 F i L Z Min. 0.51 1.15 0.356 0.204 7.95 Millimeters Typ. 3.32 Max. Min. 0.020 0.045 0.014 0.008 0.313 Inches Typ. 0.131 Max. 1.65 0.55 0.304 10.92 9.75 2.54 7.62 7.62 6.6 5.08 3.81 1.52 0.065 0.022 0.012 0.430 0.384 0.100 0.300 0.300 0260 0.200 0.150 0.060 3.18 0.125 4/6 TS393C,I,M PACKAGE MECHANICAL DATA 8 PINS - PLASTIC MICROPACKAGE (SO) Dimensions A a1 a2 a3 b b1 C c1 D E e e3 F L M S Min. 0.1 0.65 0.35 0.19 0.25 4.8 5.8 Millimeters Typ. Max. 1.75 0.25 1.65 0.85 0.48 0.25 0.5 45 (typ.) 5.0 6.2 o Min. 0.004 0.026 0.014 0.007 0.010 0.189 0.228 Inches Typ. Max. 0.069 0.010 0.065 0.033 0.019 0.010 0.020 0.197 0.244 1.27 3.81 3.8 0.4 4.0 1.27 0.6 8 (max.) o 0.050 0.150 0.150 0.016 0.157 0.050 0.024 5/6 TS393C,I,M PACKAGE MECHANICAL DATA 8 PINS - THIN SHRINK SMALL OUTLINE PACKAGE Dim. A A1 A2 b c D E E1 e k l Min. 0.05 0.80 0.19 0.09 2.90 4.30 0 0.50 o Millimeters Typ. 1.00 3.00 6.40 4.40 0.65 0.60 Max. 1.20 0.15 1.05 0.30 0.20 3.10 4.50 8 0.75 o Min. 0.01 0.031 0.007 0.003 0.114 0.169 0 0.09 o Inches Typ. 0.039 0.118 0.252 0.173 0.025 0.0236 Max. 0.05 0.006 0.041 0.15 0.012 0.122 0.177 8 0.030 o Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publ ication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a trademark of STMicroelectronics (c) 1999 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. (c) http://www.st.com 6/6 |
Price & Availability of TS393M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |